Pinguin Sherpa 30 NX Blue

Sherpa 30
Symmetrically shaped mat to ensure high comfort. The width of the mat is 55 cm along its entire length and does not narrow at the feet, making it an ideal choice for those of us who like to roll over. The height of up to 4.5 cm in turn ensures ideal damping of the unevenness of the base.

The construction with one layer of relatively large horizontal cavities saves the weight of the mat even more, while maintaining relatively high thermal comfort.

The cavities also form a pleasant wavy structure of the mat after being inflated.

Sanding the top layer of the material increases its friction, so your sleeping bag will not slip off the mat.

Double valve with high flow provides easy inflation of the mat without air escaping when it is closed. By pressing the valve, the pressure in the mat can be regulated when it is overblown.

DLF - Dual layer flat valve
Flat two-layer valve with check valve for easier inflation/deflation and pressure regulation in the mattress.

After opening the top layer of the valve, the mat can be easily inflated thanks to the non-return flap without loss of pressure. By pushing the flap, the pressure in the mattress can be gently regulated. After opening the second layer, the valve is fully open and the mat can be easily deflated.

Dual layer flat valve


SCC - Single horizontal chambers foam construction
The simple construction of wide horizontal chambers combines the maximum possible foam relief with high thermal resistance achieved by preventing air circulation in the mattress. After being inflated, the wide chambers are formed into cylinders, which significantly increase the comfort of the mattress.

Used materials

DLF
Dual layer flat valve
Flat two-layer valve with check valve for easier inflation/deflation and pressure regulation in the mattress.

When the top layer of the valve is opened, the mattress can be easily inflated thanks to the non-return flap without losing pressure. By pushing the flap, the pressure in the mattress can be gently regulated. When the second layer is opened, the valve is fully open and the mattress can be easily deflated.

SHC
Single horizintal chambers foam construction
The simple design of the wide horizontal chambers combines maximum foam lightness with high thermal resistance achieved by preventing air circulation in the mattress. When inflated, the wide chambers form into cylinders that significantly increase the comfort of the mattress.

Brushed polyester - non-skid, TPU Lamination
Brushed polyester laminated with thermoplastic polyurethane membrane for maximum reliability
To prevent air leakage through the top fabric of the mattress, an impermeable membrane is laminated to the polyester fabric. Laminating a continuous membrane instead of applying a coating eliminates the possibility of applying an uneven layer of coating, which could lead to the weakening of some parts and subsequent air leakage.

The brushed polyester gives a nice soft feel and prevents bunching. 

Technical specification