SZ Silicone High Performance 1kg Nedsil 20 TLV A

This silicone has a good fluidity and gives great detail while still remaining strong.

Note: Pot life and de-mould time are highly dependent on the mixing ratio and Humidity! By adding more than 5% silicone B (hardener) or at high humidity, the pot life and de-mould time are shorter.

* Mixing ratio in weight: A:B = 100:5
* Pot life at 20°C: 60 minutes
* Demolding at 20°C - 14 hours
* Hardness: Shore A 23-28
* Tear strength: 46 Kg/cm
* Full strength after: 3 days
* Viscosity at 20°C: 25.000 +/- 2.000 mPa s

Example: To 1 kg of A-Comp add preferably 50 grams of B-component. Less or more will inhibit cure or alter the final properties of the rubber.